Thermally treated pine is baked at around two hundred degrees long before it becomes the wall of your sauna.
Rain, snow, twenty winters. Wood with the water already driven out of it does not warp and does not rot.
Two models, five colours, a Harvia heater inside. From 7 490 €.
Two models, five colours, a Harvia heater inside. From 7 490 €.
Ordinary pine lasts about five years in a garden. It drinks water, it twists, and then the fungus arrives. Thermal treatment drives the resin and the moisture out of the board, so there is nothing left to feed on. The wood darkens with the years. It stays straight.
A classic sauna for two to four people, in a format that saves space.
More space, stronger construction, a finer finish. Standing height inside and room for four to six.
Let go and it cools back down, the way it really does.
A 9 kW heater needs a three phase supply. That is an electrician's job and it belongs in your budget from the start, not on the day of delivery. We send the drawing with the connection points before the sauna leaves us.
400 V · 16 A · 5 × 2,5 mm²The lorry brings the sauna to the edge of your property. Taking it off the lorry is the buyer's part: a forklift is enough for the Classic, the Premium needs a crane. Across the market that lift costs from about 350 €. We say so in advance and help you find the machine.
If on the day of delivery there is no crane or the pad is not ready, the lorry leaves again, and the second journey and any storage are charged separately. That is why we agree the day and the machine with you well in advance.
Classic 760 kg · Premium 1250 kgNo foundation is needed. A level, load bearing pad is enough: paving slabs, concrete slabs or compacted gravel. On soft ground point footings may be wanted. We send the drawing with the exact dimensions.
level pad, no foundation
We keep sauna bodies built and standing, then finish each one to your choice of colour, heater and options in a few days.
The configurator writes the whole specification into an email. We answer with the final price and the delivery cost to your address. No deposit is asked for at this point.
If your colour is not on the floor, the sauna is made to order in about fifty working days, painted in two coats of Tikkurila and tested with the heater running.
A flat pad, a paving terrace or a concrete slab, plus the electrical supply for the heater. We send the drawing with the exact points.
The sauna travels as one finished room. It is lifted onto your base, connected, and it works the same evening.
About forty to sixty minutes to reach ninety degrees. The exact time depends on the heater and on how cold it is outside.
While it is heating, a 9 kW heater draws 9 kWh per hour. Once it is up to temperature it switches on and off by itself, so a two hour session usually comes to ten to fourteen kilowatt hours.
Yes. That is what it is built for. The Premium wall is 185 mm with 100 mm of mineral wool, the Classic is 120 mm, and thermowood is made to stand outdoors all year.
No. A level, load bearing pad is enough: paving slabs, concrete slabs or compacted gravel. On soft ground point footings may be wanted. We send the drawing with the dimensions.
In most places a building of this size with no foundation does not need it, but the rules differ from one municipality to the next. Ask your local authority before you order.
Sending a request costs you nothing and commits you to nothing. Once we confirm the order by email, a deposit of 30 % is due. The balance is paid on the day of delivery, before the sauna is unloaded. Pay the full amount in advance and we give a 2 % discount.
Three years on the structure and on the thermowood. The Harvia heater carries its own factory warranty. This guarantee does not limit your statutory rights as a buyer. One thing it does not cover: thermowood darkens with the years. That is the material behaving as it should, not a fault.
The first deliveries are on their way. Photographs from our customers' gardens will appear here as they are installed.
We will gladly answer in the language you wrote in.